TS-430 extended coverage. Include 0-150 KHz

This modification is to include the receiving range from the TS430 from 0-150 kHz.

Connect a resistor from 1K from IC1 pin 14 to ground in the PLL Unit.

(Pin 14 from IC1 goes to the base of a transistor.)

The best way to do this, is by soldering the resistor at the solder side of the PLL Unit PCB. GW1NGL W1NGL Kevin Roberts Ham Radio

Page last updated on 12/29/2011 by Kevin Roberts W1NGL a colection of Ham Radio and Electronic Information